No ladder. No tape measure. No waiting days and paying $60. Type an address — watch the AI measure it live, and get the full professional report in about 60 seconds.
Powered by Talk to Tom
Three steps. Simple enough to explain to your dad over coffee.
We find the exact building from more than 130 million rooftops already in our database. Any address in the United States.
Satellites plus aerial 3D data map every slope, ridge, valley and edge of the roof — down to the inch. No one climbs anything.
A professional 12-page PDF: every measurement, a materials list, the waste math — ready to bid, order, or hand the insurance company. About $5. EagleView charges up to $60 and takes days.
This is exactly what hits your inbox — every page shown here comes from a live Measure Center report. Tap any page to zoom in.
The cover shot: your roof photographed from above, with the total size front and center.
Crisp aerial views of the actual roof, so everyone's looking at the same house — no guessing.
Pitch is just how steep each section is. This page lists every slope so you know what you're walking on before you get there.
Every eave, rake, ridge and valley measured to the foot — measured to the foot and totaled in a clean table.
The one-page answer: total squares and how much extra material to buy so you don't run short — the math is done for you.
Shingles, starter, ridge cap, underlayment, ice & water — exact quantities, ready to read to your supplier.
The whole job as a shopping list. Hand it over the counter and load the truck.
Siding, paint, gutters, fascia and soffit — measured from the same click. One flyover, every exterior trade.
Six words cover 90% of any roof report. Here's what they actually mean.
Nearly every rooftop in America is already in the database. Odds are, yours is too.
We read the roof's shape in three dimensions from above — not a flat photo, the actual geometry.
Fly your own drone and we turn the footage into exact measurements and a 3D model of the house.
The same AI engine that runs the Measure Center platform builds every report — and it never sleeps.
Same measurements. A fraction of the price. A tiny fraction of the wait.
| Price Per Report | Turnaround | Exterior Trades | |
|---|---|---|---|
| MEASURE CENTER THIS PAGE | ~$5 | ~60 seconds | Included — siding, paint, gutters |
| EagleView | Up to $60 | 24–72 hrs typical | Roof-focused |
| Hover | $50+ typical | 30+ min per model, capture required | Extra products |
Competitor pricing and turnaround based on publicly available rates and typical delivery windows; actual figures vary by plan and product. EagleView® and Hover® are trademarks of their respective owners; Measure Center is not affiliated with either.
That's about $4.90 a report — delivered in about a minute, exterior estimates included, yours forever.
Type an address up top, watch the measurement engine work, and have a full report in about a minute.
Log back in and keep pulling addresses — your reports, contacts and proposals are waiting.
The address bar up top is wired to the real measurement engine — no signup needed to check coverage.
Measure An Address Now